 Search the Knowledgebase |
 Browse by Category |
|
|
|
| View Articles by Category |
|
There are no sub categories
|
Trimble Software
|
There were 17 articles found in this category:
 Trimble runpkr00 v5.18
The Trimble runpkr00 program allows users to extract .DAT or .TGD files from R00/T00/T01/T02 files logged by Trimble GPS/GNSS receivers. Note that for GNSS signals to be extracted from "Record Type 27" (RT27) files the "-g" flag must be added separately to the command line, which will produce a ...
- Trimble Data Transfer Utility v1.49 (Feb 1, 2010)
The Trimble Data Transfer software transfers data from a range of Trimble devices to your PC. Devices that you can download data from include: Trimble Survey Controller Trimble Series 4000 and R/5000 receivers Trimble 3300 Trimble 3600 (Elta, Geodimeter, TDS) Trimble 5600 (Elta, Geodimeter, TD ...
- Trimble Geomatics Office - Importing RINEX 2.11 data files
Trimble Geomatics Office (TGO) does not support importation of RINEX observation files labeled as version 2.11. TGO supports importation of the following RINEX versions only: 1, 2, and 2.1 (2.1 = 2.10). When trying to import a RINEX 2.11 file, the program will produce the following error messa ...
- Trimble Geomatics Office - How to apply precise orbits in TGO
Using Precise Orbits in Trimble Geomatics Office Precise ephemeris are calculated and posted on SOPAC 3 weeks after the day the data were collected. They are used with RINEX data in place of the .nav file when cm or better accuracy is required. Go to the SOPAC Data Archive: http://sopac.ucsd.ed ...
- Trimble R7/5700 - How to verify receiver tracking using Trimble GPS Configurator software
Trimble 5700/R7 - How to verify receiver tracking using Trimble GPS Configurator software Trimble GPS Configurator software can be used to check the status of a receiver. We do not recommend it for configuring the receiver; to configure a 5700 or R7 receiver, see How to configure the receiver us ...
- Trimble 5700/R7 - How to configure the receiver using Trimble Configuration Toolbox software
Trimble 5700/R7 - How to configure the receiver using Trimble Configuration Toolbox software By configuring a Trimble R7 or 5700 receiver using the Trimble Configuration Toolbox software, a configuration file is saved internally in the receiver and can be applied every time the receiver is power ...
- Trimble Geomatics Office - How to process fast-static and post-processing kinematic surveys using TGO
How to process fast-static and post-processing kinematic surveys using Trimble Geomatics Office This is an overview of how to use Trimble Geomatics Office (TGO), with limited information on troubleshooting. See the Trimble Geomatics Office User Manual (v1.6 Rev.A, April 2002, .pdf, 1.3 MB) for m ...
- Trimble Configuration Toolbox (all versions)
Trimble Configuration Toolbox The Trimble Configuration Toolbox software provides the tools to configure Trimble 5700 and R7 GPS receivers. The configuration settings are stored in an application file (*.cfg). UNAVCO configuration file (settings: elevation mask, 5 degrees; logging interval, 15 ...
- Trimble GPS Configurator (all versions)
Trimble GPS Configurator The GPS Configurator™ software lets you configure a survey-grade Trimble GPS receiver (e.g. 5700/R7) connected to your desktop or laptop computer running the Windows operating system. You can use the GPS Configurator software to view the current receiver settings, ...
- Trimble runpkr00 v2.44
Trimble runpkr00 v2.44 The Trimble runpkr00 program allows users to extract .DAT or .TGD files from R00/T00/T01 files logged by Trimble GPS/GNSS receivers. Note that for GNSS signals to be extracted from "Record Type 27" (RT27) files the "-g" flag must be added to the command line, which wi ...
- Trimble WinFlash - How to load new firmware onto the Trimble 4700 receiver
The attached executable contains Trimble WinFlash, a Windows-based utility to load new firmware onto select Trimble GPS receivers, including the 4700. Please note that some USB-to-serial adapters will not work with this program because they do not send a break. Note: The comms cable must be c ...
- Trimble TRIM4000 Download Software for DOS
The attached executable runs the Trimble TRIM4000 software program from a DOS prompt. The software can be used to download a Trimble 4000 SSi/SSE. For instructions on using TRIM4000, see How to download using TRIM4000 for DOS.
- Trimble R-Utilities
Trimble R-Utilities No longer supported by Trimble. Trimble R-Utilities is a group of programs that permit remote control of certain Trimble GPS receivers. R-Utilities provide receiver configuration capability via direct serial, phone modem, and wireless radio protocols. The latest version of R ...
- How to download a Trimble receiver using the Trimble rfile program
How to download from a Trimble receiver using the Trimble R-Utilities programs Follow these steps to download a Trimble receiver using the command-line Trimble R-Utilities programs. If using a Linux system, this process can be automated; if using Windows, it can not. If you don't yet have the ...
- UNAVCO LAPDOGS Software
UNAVCO LAPDOGS Software UNAVCO LAPDOGS - Local Automated Process for Downloading of Global Sites UNAVCO has developed a set of programs and scripts to automate the downloading of Trimble receivers from UNIX platforms. At its core, this tool is meant to download data from a remote Trimble recei ...
- Trimble Remote Controller v2.21
The attached executable runs Trimble's Remote Controller v2.21. This software provides virtual access to all functions on 4700, 4800, 4000, 4400, 7400 and MS 750 GPS receivers and allows 4700 users to configure 1 PPS/Event Marker. For more information, download the attached v.2.21 Remote Contro ...
- Trimble Convert to RINEX Utility v1.0.1.32
The attached .msi file contains Trimble's Convert to RINEX utility v1.0.1.32. The Trimble Convert to RINEX utility converts Trimble GNSS measurement files in DAT, T00 or T01 format to RINEX version 2.10, 2.11 or 3.00 formats. The Trimble DAT or T01 files may include GPS L2C and GLONASS observat ...
|
unavco.org