| Home | About Us | Contact Us | Support | Search | | Facility | | PBO | Education & Outreach | |
|
|
|
|||||||
 |
||
 Software Remote PC Software RedHat Linux Auxiliary utilities Downloading & Data Transfer AOA Ashtech Trimble Other Pre-Processing TEQC Other Processing GAMIT/GLOBK Bernese GIPSY-OASIS II Trimble Geomatics (TGO) |
|
Data Download & Transfer - AOA Firmware
TurboRogue Firmware Upgrading Instructions1.Stop receiver tracking In the Main Status Display scroll to 1 TRACK using the left arrow key Press ENTER In Tracking Dialog Box, choose Stop Track Now! Press ENTER Answer Yes to Really Stop Tracking Now?? with left arrow key Press ENTER Press ESC There should be no satellites in top row of main status screen 2. Take out data flashcard from receiver and insert firmware upgrade flashcard 3. Make sure firmware upgrade flashcard has write protection off (white latch on flashcard end) 4. In the Main Status Display scroll to FLASH 4 using the right arrow key 5. Press ENTER 6. In FlashCard Dialog Box , choose Flash Control using down arrow key 7. Press ENTER 8. Scroll to Program using the left arrow key 9. Press ENTER 10. Choose Program using the left arrow key 11. Press ENTER, the upgrade will take a few minutes 12. When Flash Status says Copy Complete, press ESC 13. Remove firmware upgrade flashcard and reinsert data flashcard 14. Turn receiver off and back on again 15. Confirm Firmware version on front display (3.2.32.8, 1998/12/28) 16. Press ESC to return to Main Status Display and confirm receiver tracking 17. Return firmware upgrade flashcard to address below 18. Note day and time (UTC) of upgrade and receiver serial number in the return shipment Last modified Thursday, 17-Nov-2005 03:58:00 UTC |
| ||
 |
Home | About Us | Contact Us | Support | Search | Facility | PBO | Education & Outreach Comments: webmaster |
|
unavco.org