Bernese - Frequently Asked Questions


Software Remote PC Software RedHat Linux Auxiliary utilities Downloading & Data Transfer AOA Ashtech Trimble Other Pre-Processing TEQC Other Processing GAMIT/GLOBK Bernese GIPSY-OASIS II Trimble Geomatics (TGO)		Bernese - Frequently Asked Questions Question I start the `PCS` from the menu system, but it just returns to the menu panel without running. Answer There is probably a problem in the `PCF`. You will need to run the `PCS` manually, and find the problem. See the Bernese manual secion `21.6.6` for details on command line processing. The command sequence would look something like this. [braunjizu braunj]$ cd $U/WORK [braunjizu WORK]$ PCS DOCU40_1 CAMP DOCU40_1 SES 1650 YR 96 LINE: 10 FILE: DOCU40_1.PCF PID OF 000 NOT ALLOWED BAD RETURN CODE FROM CKPCF PCS: .................................................. PCS: : PCS: : RUN_PCF check/clear failed! PCS: :................................................. The error message then needs to be interpreted and fixed. In the above example, the `PCF` has a procedure defined as 000. This needs to be fixed before the `BPE` will run any further. Return to the FAQ index page. Last modified Thursday, 17-Nov-2005 03:58:00 UTC

		Home \| About Us \| Contact Us \| Support \| Search \| Facility \| PBO \| Education & Outreach Comments: webmasterunavco.org © 2009 UNAVCO, Inc.

Question