Once the campaign directories have been installed, the example data set can be retrieved. The dataset made available by Berne has also been copied over to the UNAVCO anonymous ftp area. To install the data set, the following commands need to be executed.

If the user is familar with the Bernese directory structure, they can download the data files, and install the data directly by reading the Bernese Documentation. If not, the user can use the command sequence below to install the data set.

yochi[braunj]:V41-$ cd $P/DOCU40_1 
yochi[braunj]:V41-$ ls -F
ATM/     DATPAN/  OBS/     ORB/     ORX/     OUT/     RAW/     STA/
yochi[braunj]:V41-$ ftp ftp.unavco.org
Connected to unavco.unavco.org.
220 unavco FTP server (SunOS 4.1) ready.
Name (ftp.unavco.org:braunj): anonymous
331 Guest login ok, send ident as password.
Password:
230 Guest login ok, access restrictions apply.
ftp> cd pub
250 CWD command successful.
ftp> cd BERNESE
250 CWD command successful.
ftp> cd examples
250 CWD command successful.
ftp> ls
200 PORT command successful.
150 ASCII data connection for /bin/ls (128.117.39.35,2862) (0 bytes).
total 6840
-rw-r--r--  1 12338    340       6990089 Oct  2 19:05 docu40_1.tar.gz
226 ASCII Transfer complete.
ftp> bin
200 Type set to I.
ftp> get docu40_1.tar.gz
200 PORT command successful.
150 Binary data connection for docu40_1.tar.gz (128.117.39.35,2866) (6990089 bytes).
226 Binary Transfer complete.
6990089 bytes received in 7.04 seconds (969.98 Kbytes/s)
ftp> quit
221 Goodbye.
yochi[braunj]:V41-$ ls -F
ATM/              ORB/              RAW/
DATPAN/           ORX/              STA/
OBS/              OUT/              docu40_1.tar.gz
yochi[braunj]:V41-$ gunzip docu40_1.tar.gz
yochi[braunj]:V41-$ ls -F
ATM/           OBS/           ORX/           RAW/           docu40_1.tar
DATPAN/        ORB/           OUT/           STA/
yochi[braunj]:V41-$ tar xvf docu40_1.tar
x ATM/EUR96166.ION, 2991 bytes, 6 tape blocks
x ATM/EUR96165.ION, 2991 bytes, 6 tape blocks
x DATPAN/DAT132__.PAN, 1408 bytes, 3 tape blocks
x DOCU40_1.TRN, 630 bytes, 2 tape blocks
x ORB/R3_96166.PRE, 144962 bytes, 284 tape blocks
x ORB/R3_96165.PRE, 144962 bytes, 284 tape blocks
x OUT/examp_96.165, 7098 bytes, 14 tape blocks
x OUT/examp_96.166, 6945 bytes, 14 tape blocks
x RAW/BRUS1660.96O, 1715390 bytes, 3351 tape blocks
x RAW/JOZE1650.96O, 1539024 bytes, 3006 tape blocks
x RAW/JOZE1660.96O, 1540368 bytes, 3009 tape blocks
x RAW/KOSG1650.96O, 2183391 bytes, 4265 tape blocks
x RAW/KOSG1660.96O, 2179611 bytes, 4258 tape blocks
x RAW/ONSA1650.96O, 1842480 bytes, 3599 tape blocks
x RAW/ONSA1660.96O, 1809300 bytes, 3534 tape blocks
x RAW/WTZR1650.96O, 1822047 bytes, 3559 tape blocks
x RAW/WTZR1660.96O, 1825041 bytes, 3565 tape blocks
x RAW/ZIMM1650.96O, 1899246 bytes, 3710 tape blocks
x RAW/ZIMM1660.96O, 1893114 bytes, 3698 tape blocks
x RAW/BRUS1650.96O, 1775836 bytes, 3469 tape blocks
x README.TXT, 3890 bytes, 8 tape blocks
x STA/ITRF0696.CRD, 971 bytes, 2 tape blocks
x STA/ITRFCODE.HTR, 566 bytes, 2 tape blocks
x STA/ITRFCODE.STN, 441 bytes, 1 tape blocks
x STA/EUROCLUS.FIX, 215 bytes, 1 tape blocks
yochi[braunj]:V41-$ ls -F
ATM/           OBS/           OUT/           STA/
DATPAN/        ORB/           RAW/           docu40_1.tar
DOCU40_1.TRN   ORX/           README.TXT

Check that the data are installed in the correct places

The ORB/ directory should have two precise orbit files

yochi[braunj]:V41-$ ls ORB
R3_96165.PRE  R3_96166.PRE

The RINEX files should be in the RAW/ directory, there should be six RINEX files for each of days 165 and 166 (12 files total).

yochi[braunj]:V41-$ ls RAW
BRUS1650.96O  JOZE1660.96O  ONSA1650.96O  WTZR1660.96O
BRUS1660.96O  KOSG1650.96O  ONSA1660.96O  ZIMM1650.96O
JOZE1650.96O  KOSG1660.96O  WTZR1650.96O  ZIMM1660.96O

The station coordinate files, height translation files, and station name translation files should be in STA/.

yochi[braunj]:V41-$ ls STA
EUROCLUS.FIX  ITRF0696.CRD  ITRFCODE.HTR  ITRFCODE.STN

Make sure that the receiver and antenna translation file is copied into the $X/GEN area. This file is used by RXOBV3 to map RINEX receiver and antenna names into a more consistent set of names that are defined in the antenna phase eccentricity file.

yochi[braunj]:V41-$ ls
ATM           OBS           OUT           STA
DATPAN        ORB           RAW           docu40_1.tar
DOCU40_1.TRN  ORX           README.TXT
yochi[braunj]:V41-$ cp DOCU40_1.TRN $X/GEN/.

Once the data has been installed, you will need to check that the PCF, BPE Scripts, and option files are ready to use. These topics are covered in the next section.

Last modified Thursday, 17-Nov-2005 03:58:00 UTC

Home | About Us | Contact Us | Support | Search | Facility | PBO | Education & Outreach

Comments: webmasterunavco.org
© 2008 UNAVCO, Inc.